|
Andritz Küsters offers technologies
and ranges for the production of textiles and nonwovens
|
Andritz Küsters is
an enterprise of the Andritz Group located in Krefeld. The
enterprise comprises of the divisions Nonwoven and Paper of
the former Eduard Küsters Maschinenfabrik GmbH & Co. KG and
the Coating Division of the Swiss Bachofen + Meier AG.
Andritz Küsters controls all products, patents and trademark
rights in these business areas. The prime focus of the
business activity is the development and sale of
technologies and ranges for the production and finishing of
nonwovens, textiles, cardboard and paper. At the locations
in Krefeld (D), Spartanburg (USA) and Bülach (CH) the
enterprise has a total of about 400 employees. |
Andritz Küsters, will present their complete product range of
calenders and rolls for the textile industry as well as
machinery for the nonwoven industry at Shanghaitex 2009 within
the German Pavilion at Hall W2, Booth B54.
The enterprise from Krefeld, Germany is well supported by
their representatives AKM (based in Shanghai and Hong Kong), who
have derived from Kuesters Far East and Kuesters Shanghai. All
AKM sales and service staff are extremely familiar with the
Andritz Küsters products.
Under the motto “textile eXcellence”
Andritz Küsters focuses upon their long experience and
comprehensive knowledge in calender and roll technology.
“Textile calenders and rolls are made in Krefeld. And that
for over 140 years!” states Andreas Lukas, Vice President of
Andritz Küsters. This long experience of Küsters and
Kleinewerfes has been the foundation of the new Andritz Küsters
teXcal technology. “The two unique deflection controlled roll
systems S-Roll and HyCon Roll are our core competence. Our
clients get precisely the right calender technology their
product needs.”
|
 |
|
teXcal s-roll
with a maximum line force of 400 N/mm. |
With a maximum line force of 400 N/mm the teXcal s-roll with
deflection control raises the bar to set new standards,
especially in technical textiles which require defined low air
permeability as e.g. parachute silk. Other deflection controlled
calender systems with synthetic coatings are limited to a line
force of 300 N/mm. This means that the fabric needs multiple
calendering, whereas the teXcal s-roll with especially adjusted
surface technology can achieve best compaction results in just
one passage.
The original S-Roll technology from Andritz Küsters, Krefeld,
shows excellent performance in a great variety of textile
processes. Andritz Küsters and AKM offer worldwide comprehensive
and competent service for all S-Roll systems in the textile
industry, including repair, overhauling, original spare parts
for roll and control system as well as original spare rolls.
In addition, Andritz Küsters present their entire range of
services for the nonwoven industry. This includes leading
calender technology as well as the latest developments in wet
finishing of nonwovens and complete lines for wetlaid nonwovens.
Product range Andritz Küsters
Nonwoven
- Textile Calenders and Rolls (S-Roll, HyCon Roll
Technology).
- Wetlaid Technology.
- Nonwoven Calenders and Rolls (Hot S-Roll Technology).
- Ultrasonic Technology.
- Wet Finishing Technologies for Nonwovens.
Andritz Küsters Service
- Product Development at the Andritz Küsters Technical
Centre.
- Worldwide Customer Service, Consulting, Training, Repairs,
Re-Design and Spare Parts.
| 
